Manesh Electronics Inc.

HP DesignJet Printer Sales and Repair in MD, DC, & VA for over 30 years. Call (301) 340-0000

Designjet Error Codes

Model T1100

Designjet Error Codes
ModelError CodeProblem DescriptionCorrective Action Options
T1100 01.0:YZ HCI queue does not end after 2 seconds. Turn off/on. If error continues repalce Formatter, Repalce the Main PCA
T1100 01.1:YZ NVM backup: not found, read, write or read back error. Turn off/on. If the System Error continue replace the main PCA, Replace Formatter
T1100 01.2:YZ Print Mech PCA fault or NVM backup failure. Turn off/on. If the System Error continue replace the PrintMech PCA
T1100 01.3:YZ Problem with the PrintMech PCA. Turn off/on. Turn off/on. Check cables for PrintMech PCA and Main PCA, repalce Main PCA, Repalce Formatter
T1100 02.1:YZ Encoder seems to be wrong. Turn off/on. Check Trailing cable, replace if needed, if continues repalce Carriage PCA, Repalce the Main PCA
T1100 02.2:YZ Problem with the Carriage PCA. Turn off/on. Check trailing cable, replace if needed, if continues repalce Carriage PCA, Repalce the Main PCA, if Error conitnues repalce Formatter Board
T1100 03:YZ Problem with Power Supply Unit. Turn off/on. Perform the Electronics Module Test Diagnostic, Replace Power Supply
T1100 05.1:YZ CPU Fan is stopped or burnt. Turn off/on. Replace Power supply, replace Main PCA
T1100 05:2:YZ Main memory size failure. Turn off/on.Check Memory Module, replace the Formatter, replace the Main PCA
T1100 06.1:YZ Main NVM failure - not detected, read/write failed Turn off/on. If error continues repalce Formatter
T1100 06.2:YZ NVM main: not detected, read, write or read back error Turn off/on. Replace Formatter
T1100 07.1:YZ Fan PSU driver burnt. Turn off/on. Replace the main PCA, Replace the Formatter
T1100 08:YZ Problem with the Front Panel. Turn off/on. Check Front Panel interface cable connected to PCA. Ck memory module in formatter, check connections, check for Firmware update,Repalce Main PCA, Formatter, Front Panel
T1100 11:YZ Trailing Cable does not seem to be detected. Turn off/ on. Check trailing cable, replace if needed. Check connection to PCA, If error continues repalce Formatter, Main PCA, Carriage PCA
T1100 12.n:YZ Carriage & PC Main doesn't detect pens Turn off/on. Check trailing cable, check PCA connection, check printheads, check flex ciscuit contacts and printhead contacts, Replace Carriage PCA, replace Main PCA
T1100 13.1:YZ The ISS cable may be not properly connected or malfunctioning. Turn off/on. Removce ALL cartridges and reinstall, check cables between ink supply station and main PCA, replace ink supply station, replace main pca
T1100 17:YZ Harness of PCA Main to Printmech not connecting Turn off.on. Check interconnection cables, replace harness, replace main pca, replace printmech PCA
T1100 21.1:YZ service Station servo shutdown Turn off/on. Perform service station diagnostic test, repalce servcie station, replace PrintMech PCA
T1100 21.2:YZ Fail moving Service Station Turn off/on. Check service station path for obstacles, perform service station diagnositic , replace service station, repalce PrintMech PCA
T1100 21.3:YZ Problem with Service Station Turn off/on. Check service station path for obstacles, perform service station diagnositic , replace service station, repalce PrintMech PCA
T1100 21.4:YZ Primer Error, Primer motor, Servo Shutdown, Servo Fault Turn off/on. Check service station path for obstacles, perform service station diagnositic , replace service station, repalce PrintMech PCA
T1100 22.0:YZ ISS BPS0 error Turn off/on. Check cables from Ink Supply Station to main PCA, perform ISS diagnostic, Replace Ink Supply Station, replace Main PCA, Replace Formatter
T1100 22.1:YZ ISS BPS1 error Turn off/on. Check cables from Ink Supply Station to main PCA, perform ISS diagnostic, Replace Ink Supply Station, replace Main PCA, Replace Formatter
T1100 24:YZ Ink Setup failure Turn off/on. Try purging the Ink Supply Tives, Install new Cartridges in printer and purge ink supply tubes again
T1100 26.1:YZ Order of Ink Supplies incorrect Remove ink supply cartridges and check they are correct, check for latest firmware
T1100 26.2:YZ A Wrong ink cartridge detected Remove ink supply cartridges and check they are correct, check for latest firmware, repalce the ink supply cartridges
T1100 27:YZ An Error has occurred in Printhead detection Turn off/on. Remove and reinstall printheads, repalce carriage cover, replace the carriage PCA, Replace the Formatter
T1100 41:YZ Electrical fault or current limit in Media-Axis Motor.. Turnoff/on. Check fo visable obstacles restricting movement of Media advance roller, run Media Drive Diagnostics, Check Cables, replace Media Advance Drive or Main PCA
T1100 42:YZ Electrical fault or current limit in Scan-Axis Motor.. Turn off/on. Check for visable obstacles, perform Scan Axis Diagnostic Test, Check cable, repalce PrintMech PCA, Replace Scan-Axix Motor, Replace PrintMech PCA
T1100 44:YZ An error with the Rewinder System has been detected. Turn off/on. Check the Rewinder cable, check the Right spindle holder, perform rewinder diagnostic test, replace the right spindle, repalce PrintMech PCA
T1100 47:YZ Star wheels motor error. Turnoff/on. Check Starwheel Assembly cable, check for visable obstacles, perform Scan Axis starwheel diagnostic test, replace Starwheel motor, replace Main PCA
T1100 48:YZ PPS System failure Turn off/on. Check pen to paper space solenoid cable for damage, perform scan axis PSS diagnostics, replace PPS, replace PrintMech PCA
T1100 51:YZ Window sensor failure Check Window position sensor cable, replace window position sensor
T1100 52:YZ The printer has detected a faulty pare in Drop Detector (DDP) Turn off/on. Check drop detector cable, check service station cable, repalce drop detector, reset calibration of drop detector, repalce PrintMech PCA, replace Formatter
T1100 52.1:YZ Failure to switch ON Drop Detector (DDP) Turn off/on. Check drop detector cable, check service station cable, repalce drop detector, reset calibration of drop detector, repalce PrintMech PCA, replace Formatter
T1100 52.2:YZ Failure to switch OFF Drop Detector (DDP) Turn off/on. Check drop detector cable, check service station cable, repalce drop detector, reset calibration of drop detector, repalce PrintMech PCA, replace Formatter
T1100 53:YZ An error with the Main Media Sensor has been detected. Check out of paper sensor, perform the sensors test, replace out of paper sensor
T1100 54:YZ An error with the Pinch Lever sensor has been detected. Check that the media Lever position sensor cable is not damaged and connected to the PCA. Repalce the Media Lever Position Sensor
T1100 55:YZ Line Sensor error , failure to access Line Sensor EEPROM Turn off/on. Perform carriage test, check line sensor connections to PCA, replace line sensor, repalce carriage PCA
T1100 56:YZ Drive roller analog encoder sensor fail or calibration failed Turn off/on. Perform Media Path Test, repalce the encoder disk and encoder sensor, replace Main PCA
T1100 58:YZ Line sensor not functioning correctly Turn off/on. Perform Line Sensor Calibration, check printer has latest Firmware, perform carriage test, repalce line sensor
T1100 61:YZ The file format is incorrect Printer cannot process the job Check the file to see if correct format, check firmware, re-install post script fonts, send file without password protections
T1100 63:YZ Input/Output problem through the Network Card Turn off/on. Check network cable, check firmware, is error continues replace Formatter, replace the Main PCA
T1100 64:YZ Input/Output problem through the USB Port. Turn off/on.Check USP cable, check firmware,update, replace formatter, repalce Main PCA
T1100 65:YZ Memory Driver Internal I/O error, I/O Socket ,Internal I/O error Turn off/on. Check unknown port cable, check firmware update, repalce Formatter, replace Main PCA
T1100 66:YZ Cannot print file on current paper type. Resend the file, on current paper type, change paper type to type loaded when file sent
T1100 67:YZ Input/Output problem through a Firewire Port. Check the firewire cable is correctly connected, check the printer has latest Firmware, If error continues replace the Main PCA
T1100 71:YZ Out of memory failure. remove unnecessary files from the Hard Disk Drive of the Formatter using the Web Server
T1100 71:10:00 Default Serial Number found in the main and backup NVM Perform Error 71:19 reocery service Utility (Caused by replacing the fromatter and PrintMech PCA at the same time)
T1100 72:YZ Servo Error. Turn off/on. Check printer has latest firmware, Perform Scan Axis Test, if error continues Perform Media Drive Diagnostic test
T1100 74:YZ Failed getting Part Numve/Serial Number Turn off/on, check that the Printer has the latest Firmware, Use the Service munu to update the S/N or Part Number
T1100 75.2:YZ Preventive Maintenance Kit #2 counter active, Spitoon foams Turn off/on. Change the service station
T1100 79:YZ Generic Firmware error. Turn off/on. Check that the Printer has the latest Firmware version
T1100 81:YZ Paper servo shutdown. Check paper path for obstacles, perform media drive diagnostic, check connections to Main PCA, repalce the Media Advance driver
T1100 85:YZ Problem finding the Drive Roller zero Perform the Media Drive diagnostic test to troubleshoot the problem
T1100 86:YZ Possible Paper Jam Turn off/on. Check for visible obstacles, Clear paper path
T1100 87:YZ Problem finding the Scan-axis encoder reading. Turn off/on. Movement jam, possible paper jam, mechanical initiator scan azis mearue error, check Scan-Axis Motor, Check encoder sensor is connected
T1100 94:YZ Color Calibration Error Perform Line Sensor Calibration, replace Line sensor, repalce Carriage PCA, replace Formatter
T1100 94.1:YZ Profiling algorithm failed. calibrate line sensor, repalce line sensor, replace carriage PCA, replace Formatter
T1100 95:YZ Calibration of the Paper advance doesn?t activate. One of printheads changed, perform paper advance routine to calibrate paper advance
T1100 97:YZ The Calibration of the Paper advance doesn?t activate. Perform the Service menu > Paper Advance routine to calibrate the paperadvance